BIST
1342
USD/EUR
1,1924
Amerikan Doları
2,12326
Euro
9,5618
İngiliz Sterlini
10,7221
Japon Yeni
7,7344
Rus Rublesi
2,1371
SA Riyali
1,9634
Altın
0,94442
Son Güncelleme: 27.11.2020 04:55
Site İstatiğimiz
Toplam: 50169590

Enhanced dark glass recovery technology

By using high‐end sorting technologies such as X‐ray fluorescence and LED camera systems, a recycling rate of glass of up to 74% can be achieved in current glass recycling facilities. The obtained recycled glass can be used as a substitute for the glass re‐melt industry for the production of new glass containers.

Until now, the sorting process in such a recycling facility has caused a significant loss of good cullet especially into the CSP reject stream (Ceramics, Stone and Porcelain) with glass contents of up to 90%. The reason for this significant loss in glass is the result of outdated sorting techniques. Due to the low transmission value, dark and thick glass pieces cannot be told apart from CSP and are ejected along with the CSP by optical sorters. This will result in lower output rates and increased disposal costs for the CSP reject stream due to the higher volume.

Redwave has taken on this challenge and through continuous research and development of its glass sorting sensors and software. Redwave has achieved superb detection rate of dark glass. Detection of dark glass has improved by more than 50% while there have been no losses when it comes to semi‐coloured glass or thin porcelain. This new Redwave sensor and software can easily be up‐ graded thus eliminating incurring costs on facility extensions and avoid the need to purchase additional sorting machines.